The salesman of a printing factory usually needs to do a lot of related work in the process of thermal transfer printing after receiving the garment thermal transfer printing order from the customer. The specific method can be divided into the following steps
Tool/drawing making
· prepare the flower clothes (or cloth) provided by the customer to the plate making factory to scan with a high-resolution scanner check the border line electricity distribution drawing.
· or: using a high resolution SLR camera to shoot the pattern, input the computer check line electric points drawing finalization.
· it is also possible to make some comparisons between the pre-designed ai or PDF format file and the actual size and color number of the file according to the pattern size required by the customer, so as to decide whether some changes need to be made, and calculate a pattern cycle according to the actual height and width of a garment, and then draw to finalize.
Steps/methods/time required
1. After the design of the printing manuscript is completed, the plate can be made.This time, under normal circumstances, the platemaking cycle takes about 3~7 days.
2. After getting the printing roller, go to the printing house for printing.
Printing material
(1) paper for printing, from low to high quality, in order: newsprint, glossy paper, white paper.
(2) type of ink: sublimation heat transfer ink.
Responsibilities of the person in charge of printing factory
(1) after the printing factory gets the printing paper, it shall first check the quantity of the materials supplied by the customer and whether the cloth is defective, damaged or greasy.
(2) if there is a lack of number or check out flaws, damaged, greasy cloth, to timely feedback to the customer, let the customer know.
(3) shortage of incoming goods: timely replenishment is required to avoid unnecessary disputes and misunderstandings caused by innocent shortage in the future.
(4) in actual production, each 3 transfer printing machines should be equipped with at least one printing team leader.
(5) responsibilities of the group leader: check the quality of printed products at any time, master the temperature change of transfer printing machine in real time, and follow the air
Humidity and indoor temperature shall be appropriately increased or decreased.
Matters needing attention
, doing clothing apparel fabrics thermal transfer thermal transfer or do, because of printing paper also has some inevitable shortcomings, at this time, have to ask employees to observe carefully, not the customer fabric printed on have problem of printing paper in the past, but should not stop idling, will be defective printed paper tore off, thereby reducing the waste of customers of cloth