Sublimation transfer printers are a kind of digital printers that many advertising companies are now equipped with. In their daily printing work, some users will find that the printer has a little noise and the printing is not stable. So what should I do when these problems occur in the photo machine? Today I will share with you the following tips, which can make your photo machine run smoothly with less noise during printing.
The inkjet sublimation printing machine adopts a main body printing platform and a rack-supported design scheme in the model design. The printing of the photo machine is powered by the related drive servo motor, which drives the nozzle carriage to run left and right on the printing platform, and the stepping motor controls the related printing and paper feeding system. During the printing process of the photo machine, the operation of the motor provides the driving power for the photo machine, and it is also easy to cause the noise root point of the photo machine during operation.
When the piezoelectric printer has a lot of noise when it is running, it can usually be checked and solved by the following aspects.
1. Whether the rack installation of the digital sublimation printer and each connection structure are fixed with screws, so in the process of installing the new machine rack of the photo machine, you must pay attention to the installation of the rack at every connection point. Screws should be fixed and tightened.
2. Check whether the related motors of the photo machine are operating normally.
3. Whether the motor and the main body screw are loose and not fixed properly.
4. Whether the tightness between the motor and the pulley is too loose or too tight, you can observe and adjust the tightness appropriately.
5. The smoothness of the guide rail of the trolley frame of the photo machine. If the guide rail is not flat, there will be noise when the trolley is running, and the trolley will shake.
6. The flexibility of the ink chain of the photo machine and whether there are debris or paper jams are also one of the reasons why the ink chain is likely to produce noise during the inkjet printing process of the photo machine.