Several identification methods of thermal transfer paper:
1. The surface of the thermal transfer paper is coated with a special coating, so after you wet your hands a little, it will feel sticky to the touch, while the surface of the color-spraying paper is a layer of powder. A scratch can be made by scratching.
2. When the patterned thermal transfer paper is placed on the heating plate of the flatbed machine for baking, it will bend naturally. This is a normal phenomenon, because there is a special thermal transfer coating on its surface. And put the patterned ordinary color inkjet paper into the flatbed machine to bake. It will not warp, but the color of the picture will be much deeper.
3. Take the light-colored clothes of chemical fiber fabrics for comparison. After the thermal transfer paper is printed, the pattern is very clear and realistic. More than 90% of the ink has been sublimated to the clothes, and the remaining ink on the paper is only 10% at most. After the color inkjet paper is transferred, the pattern can also be seen clearly, but the clarity is not enough, it does not feel realistic, and the restoration effect is not very strong. Looking at the residual ink on the paper, about 50% of the ink remains, that is, sublimation. The ink on the clothes is only 50%. If you don't look carefully, it seems to be a picture that has not been transferred.