Some tips for saving ink
1. Ensure that the nozzles of the replenished ink cartridges are in good condition;
2. It is best to use high-quality original ink to add ink;
3. Before refilling the ink, the ink cartridge should be thoroughly cleaned, otherwise the mixing of two different inks is likely to cause a chemical reaction, leading to malfunctions such as plugging. Cleaning the ink cartridge with the built-in software can only solve the slight clogging. It is best to inject water into the ink cartridge with a syringe before adding the ink. Try not to let the water overflow, then grab the ink cartridge with your hand and shake it gently. , Let the remaining ink fully dissolve in the added water. If you use too much force while shaking, it may overflow the water inside. At this time, wipe it dry with a paper towel or cloth immediately to prevent it from infiltrating into the chip and causing hardware failure. Continue to use a syringe to drain the mixed liquid in the ink cartridge. , Repeat the operation several times, until the color of the liquid drawn out is very light, and then the ink can be added;
4. When filling the ink cartridge with ink, it is necessary to grasp the amount of ink, not too much;