With the development of the apparel industry, The customers who run the rotary sublimation machine increase, Rotary sublimation machine as a large machine, can bring high output, cut pieces or roll to roll transfer. In the process of using the rotary sublimation machine, it is a common phenomenon to appear ghosting during the transfer. Here are the reasons of ghosting and solution.
| Reson | Judgment method | Solution |
There is no timely separation of the fabric when it comes out | See if the wasted sublimation paper is straightened or not. | Separates the fabric and the paper separate immediately. |
| The method of separation is erroneous. | Increasing the speed of motor to collect wasted sublimation paper. | |
| The Elastic fabrics is serious. | Test with one meter of fabric with high temperature to see if the size of the fabric Shorter than before entering into drum. | Before transfer, Make fabrics squeezing. |
| Too much ink and too long sublimation time. | Speed up the transfer speed. | |
| Sublimation paper is not dry enough. | Check if there is any ink in the back of the transfer paper. | Take a small piece of paper to dry and test again. |
