When we print the picture, there will always be the remaining sublimation printing ink. Do you know how to remove it from the ink cartridge without harming the printer?
First of all, we should return to the initial position of the printer ink cartridge, then take out the wasteheat transfer sublimation ink tube from the waste ink bottle, insert the waste ink nozzle with a 50ML syringe, and force the syringe backward until the waste ink extraction is completed, and insert the waste ink tube into the waste ink bottle after the extraction. It should be noted here that when drawing out the waste
ink to pull back, waiting for no back force to release the hand, pumping can not immediately pull out the syringe.
In the extraction of waste ink, must pay attention to the following three conditions:
1.When drawing out the waste dye sublimation ink, if it is found that there is oil leakage, do not waste ink, should be careful, that the universal printer cleaning system is a problem, need to replace the nozzle protector to solve.
2.If there is water leakage in the process of ink pumping and waste ink, it indicates that the ink sac of universal flat plate printer is damaged and cannot be used normally, and a new ink sac needs to
be replaced.
3.Every time after cleaning the flat plate printer to extract waste ink, must be clean, so as not to cause "siphon" phenomenon, causing unnecessary loss of ink cartridge and the pollution of the whole ink system.
Customers in the universal printer to extract waste dye sublimation ink, be sure to follow the correct steps to operate, so as not to damage the second inkjet printer. Novice purchase of inkjet printer, operation, be sure to follow the instructions or technical professional training say operation steps, in order to avoid failure, damage inkjet machine. In the printer failure, encountered their own can not solve the problem, be sure to find a manufacturer of technical guidance for operation, do not dismantle their own printer.